Furick Cup

#4 ceramic Nozzle 10 pack for 9/20 torches or 17,18 and 26 torches with adapter hardware 1/4inch ID
Mounts on standard Gas Lens 45V44 for 9/20 torches or Can mount on the 17,18 and 26 torches with Listed Items below.
9/20 torch mount list
45V44- 3/32 size gas lens 45V43- 1/16 size gas lens 45V45 – 1/18 size gas lens ( you can find these in 9/20 torch section)
17,18 and 26 Adapter hardware
17 adapter Kit ( All hardware needed for 17,18 and 26 torches non CK torches)
17ICK- Insulator for CK torches
COL11617S- 1/16 Slit Stubby for conversion

#4 ceramic Nozzle 10 pack for 9/20 torches or 17,18 and 26 torches with adapter hardware   1/4 inch ID

Mounts on standard Collet body for 9/20 torches  or Can mount on the 17,18 and 26 torches with Listed Items below.

17,18 and 26  Adapter hardware

17CB20332 – Collet body adapter in 3/32 size will also accommodate 1/16 with slit collet

17IS- Insulator for NON CK torches

17ICK- Insulator for CK torches

COL33217W- 3/32 wedge collet for Stubby conversion

COL11617S-  1/16 Slit Stubby for conversion

BBWSG-19 is the new improved design of the original BBW. The new features include a threaded Brass chassis and improved gas delivery . This model will no longer require orings .

The BBW is full made in the USA and is set up for 3/32 tungsten. She performs great at gas rates of 30 CFH to 40 CFH.  The BBWSG-19  uses the same diffusers as the original so its still a great affordable consumable. You get 1 spare diffuser disc with the cup as well you can purchase extras in the store.

IMPORTANT!!!!!!!!!!!–   DO NOT OVERTIGHTEN THE GLASS.  Just screw the cup on until you feel minimum tension.   THE BRASS WILL NOT BOTTOM OUT ON TORCH SO DONT MAKE IT

DC ONLY- MAX AMPS 180   I will have 1/8th diffuser options soon that will take you over 250amps capabilities

NO WALKING  THE GLASS .

Includes 3 Stainless Steel diffuser screens. Install with cupped screen facing inside cup and push flat side into cup evenly. It may take a few tries to get the screen even. Make sure there is even gap between the screens and the screen facing the end is tight against the wall of the glass.

Please see picture of the Fupa 12or Moose Knuckle 14 cup to see desired result.

FUPA SG-13  Spare glass   comes with spare oring to mount brass insert

The Fupa SG-13 is a Size 13  with a thread on brass insert  No more orings

• No More Orings
• Flat Diffusers
• 3/32 size stock

Comes with Glass cup ,   Diffusers sold separate.  Comes stock with 3/32