Furick Cup

The flange saddle O2 bungs are essential to ensure you will have no cracks on thinner gauge stainless . The O2 bungs cast 316 Stainless steel . The saddles are made to fit on a 2.625 diameter tube but the saddle is easy to form using a hammer and dolly to custom fit on all types of diameters and parts on the tubing.

8 pieces
Cast 316 stainless steel O2 bungs ,

These small weld tab/Link combos are great for your header to collector connections, They are made of 304 SS and come with 2 tabs, one link tab and bolts and jet style Nuts .

Note: When installing these leave the bolts slightly loose to allow header movement in order to prevent stress from heat expansion. When fabricating headers you always have to allow for thermal expansion vibration in order to make your header last

Furick Exclusive  #5  Ceramic  Made to our Spec , A little beefier and more Precise then your normal everyday #5 .  These are made to our strict dimensions and you will 4 Quality controlled ceramic  #5 cups with the Furick embossed logo .

MOUNTING 

9/20  torches   — Use a standard Collet Body

17-18 and 26 torches –  You will need stubby Collet body parts listed in the 17 torch section of site    17CB20116 –   17CB20332  or 17CB20125   these are the 3 sizes of collet bodies   you will need to get corresponding collets as well   in the size you choose

Furick Designed and Developed . A more precision ceramic part ,

Includes 4 pcs of #4 Furick Collet body Ceramic nozzles

Will mount on a 9 torch with collet body

17 torches will require stubby collet body parts available in the 17 torch section .

Furick Precision #8 ceramic 4 pack

These #8 Pro cups are embossed with the Furick LOGO and made to my personal Spec .

These are AC/DC  ready and a must to have in your welding kit,

Precision Ceramic means Every cup is made with care, These are not run of the mill , Often times you buy a cheap pack of 8 and a few are unusable due to the lack of attention and care for manufacture.  We make sure the ceramics are quality and will give you great results

9/20 Torch mounting –    45V43-  1/16           45V44  –    3/32         45V45  –  1/8

17,18 and 26 Torch mounting –     11617GL –   Stubby  1/16  gas lens      33217GL-  Stubby  3/32 gas lens       12517GL – Stubby   1/8th  gas lens   (Note with 17,18 and 26 torches you will need the stubby collets and the insulators to match

Comes with 1 single #8pro cup and mounting o-rings.

The #8pro cup is an AC/DC polarity consumable with a 200 amp rating and has an inner diameter of .500 / 12.5mm. It is commonly used for most mild steel and stainless steel applications where good gas coverage is wanted and arc stability is critical. The #8 size cups are a great all around size for most industrial, Hot Rod and hobbyist applications. It will require 15-20 CFH of argon flow. You can run 3/32-2.4mm or 1/16 – 1.6 mm tungsten with this cup. Please do not “walk the Cup” with any of the Furickcup line of Borosilicate glass cups.

#8 pro Mounting

If you have a #17, #18 or #26 size torch you will need a #17 kit ,

If you have a #9 or #20 torch you will need to have a 45V44 gas lens. If you have one already you can use it. Keep in mind that import brands yield lower results.

Please see identify page for torch description