Design Engineering

Boom Mats new commercial-grade 2in wide Installation Roller is constructed of polished hard maple for no-track seams and a better hold. This versatile wear-resistant roller features a plated axle and rust resistant frame. Its rubberized anti-slip handle provides a soft feel reducing fatigue while offering superior durability better adhesive transfer and long lasting use.

Boom Mat Damping Material solves the problem of noise, vibrations, squeaks and rattles that come from roads, stereos, engines & more. Boom Mat Vibration Damping Material is a premium quality damping material providing extreme noise damping for the most demanding commercial and sound competition applications. Interior panels vibrate and generate noise. Boom Mat stops that noise by trapping it between our thick, 4 mil aluminum stiffening top skin and the asphalt free, pure butyl, noise constraining layer. Plus worry-free no snag adhesion to any interior surface, vertical or overhead, even in the most demanding of temperature extremes.

A high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber with 304 stainless mesh outer covering, EXO Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F.

A high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber with 304 stainless mesh outer covering, EXO Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F.

Thermal Sensor and Wire connector covers are a great way to protect sensors plugs and wire connectors from heat, moisture and dirt. They are made from an aluminized insulation that will reflect heat and act as a thermal barrier for sensitive wire connections and sensors.

Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield(TM) was designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Form-A-Shield(TM) can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield(TM) can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system.

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Versa Shields(TM) solve the problem of failing starters and other components due to heat soak. Versa Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material.

HT Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1200 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home.