Design Engineering

Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200F direct/2000F radiant Only exhaust wrap with installation guide lines Added durability and heat retention

Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.

Under Carpet Lite solves the problem of engine, exhaust and road heat soaking into interiors. Under Carpet Lite is a superior sound decoupling material for those hard to cover areas like door liners, rear decks, headliners and more. Under Carpet Lite (UC Lite) is a 1/2 in. thick multi-layer, high tech composite material designed to be extremely flexible and easy to install. UC Lite offers maximum thermal insulation in a lightweight padding (approx. 0.23lbs per square foot) that provides less heat transfer in the summer while protecting against the transfer of cold air in the winter.

Form-A-Barrier solves the problem of needing a light weight, formable shield to protect components from heat. Light weight, formable, rigid shield provides excellent thermal protection up to 1300F with minimal gap of 1 inch to heat source. Can be formed or bent by hand to conform to odd shapes. Mechanically fasten with pins, screws or bolts.

Thermal Sensor and Wire connector covers are a great way to protect sensors plugs and wire connectors from heat, moisture and dirt. They are made from an aluminized insulation that will reflect heat and act as a thermal barrier for sensitive wire connections and sensors. Simple to install with a split top to cover connectors near engine manifolds, turbos, and their heat sources. Includes: Two (2) covers, 32mm I.D. x 2 in. with 35.2mm O.D.

Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800F direct heat/2500F radiant.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! DO NOT apply directly to exhaust components.

Turbo Shields solve the problem of extreme underhood heat, stops heat damage of painted or carbon fiber hoods and helps turbos spool faster. DEI recognized the need for new Turbo Shield applications, and now offer Turbo Shields in the smaller turbo sizes. Unlike cheap, knock-off copies, DEI Turbo Shields use an exclusive combination of premium heat resistant textiles and newly designed stainless steel attachment anchors.