Design Engineering

Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting.

Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800F direct heat/2500F radiant.

Heat Shroud GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. High temperature Metalized Polyimide lamination, bonded to a robust 20oz heat treated glass fiber base material, Heat Shroud GOLD will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800F makes Heat Shroud GOLD the perfect choice to keep critical lines cool and protected.

Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield(TM) was designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Form-A-Shield(TM) can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield(TM) can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800F direct heat/2500F radiant.